Menu

Canada Canadian Customer?  Go to our Canadian Store

Customer Service 1-877-838-1399 - 8AM-5PM EST Mon-Thu & 8AM-4PM EST Fri

Cart

0 item (US$0.00)

X

You are currently searching with filters

High Output Stator 200 W For Honda XR 400 R XR 650 R 1996-2007

RM01023
RMSTATOR

High Output Stator 200 W For Honda XR 400 R XR 650 R 1996-2007

RM01023
RMSTATOR

Availability: In stock

Price: US$149.00

OR

Brand new High Output 200 W aftermarket stator

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation.
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Pick up pulsar coil included
  • Connector included
  • Rubber grommet included
  • All products shipped are tested
  • One year limited warranty

20% MORE OUTPUT OVER STOCK, WORKS WITH ALL OTHER OEM COMPONENTS.

For a limited time we are including, FREE OF CHARGE, the Tympanum AC regulator required to run the extra wattage supplied from our 200W stator.

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Details

Brand new High Output 200 W aftermarket stator

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation.
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Pick up pulsar coil included
  • Connector included
  • Rubber grommet included
  • All products shipped are tested
  • One year limited warranty

20% MORE OUTPUT OVER STOCK, WORKS WITH ALL OTHER OEM COMPONENTS.

For a limited time we are including, FREE OF CHARGE, the Tympanum AC regulator required to run the extra wattage supplied from our 200W stator.

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Videos

Specifications

Dimensions:
Interior diameter: 53 mm
Exterior diameter: 115 mm
Thickness: 14 mm

Length of wires stator to grommet : 50 mm
Length of wires grommet to plug : 600 mm
Length of pickup coil's wire to grommet : 85 mm

Other specifications:
Number of wires : 8
Number of plugs : 7
Number of pins: 8

Wire to wire resistance:
Alternator : Green to White = 0.2 ohms+/-20%
Pick up : Blue/yellow to Green/red = 250 ohms+/-20%
Source : Black/Red to Brown = 100 ohms+/-20%

OEM # Replacement

31120-KCY-671
31120-MBN-671

Fits models

Installation instructions

Before installing your new stator

  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.

Reviews

Q&A