High Output 250 Watt Generator Stator for Suzuki DR 650 SE 1996-2019

• 2019 Suzuki DR 650 SE
• 2018 Suzuki DR 650 SE
• 2017 Suzuki DR 650 SE
• 2016 Suzuki DR 650 SE
• 2015 Suzuki DR 650 SE
• 2014 Suzuki DR 650 SE
• 2013 Suzuki DR 650 SE
• 2012 Suzuki DR 650 SE
• 2011 Suzuki DR 650 SE
• 2009 Suzuki DR 650 SE
• 2008 Suzuki DR 650 SE
• 2007 Suzuki DR 650 SE
• 2006 Suzuki DR 650 SE
• 2005 Suzuki DR 650 SE
• 2004 Suzuki DR 650 SE
• 2003 Suzuki DR 650 SE
• 2002 Suzuki DR 650 SE
• 2001 Suzuki DR 650 SE
• 2000 Suzuki DR 650 SE
• 1999 Suzuki DR 650 SE
• 1998 Suzuki DR 650 SE
• 1997 Suzuki DR 650 SE
• 1996 Suzuki DR 650 SE

Dimensions :
Interior diameter : 54 mm
Exterior diameter : 115 mm
Thickness : 18 mm
Length of wires stator to grommet : 140 mm
Length of wires grommet to plug : 825 mm
Length of pickup coil's wire to grommet : 80 mm

Other specifications :
Number of wires : 7
Number of plugs : 2
Number of pins : 7

Wire to wire resistance :
Alternator : White To White = 0.4 ohms +/-20%
Pickup : Green To Blue = 230 ohms +/-20%
Position Sensor : Black To white = 0.4 ohms +/-20%

Before installing your new stator

• Check the AC output of the stator.
• Replace any burned or corroded connectors on stator and regulator/rectifier
• Check and repair any melted wiring.
• Use hi-temp dielectric grease on all connectors

Before installing your new stator

• Check the AC output of the stator.
• Replace any burned or corroded connectors on stator and regulator/rectifier
• Check and repair any melted wiring.
• Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.