Menu

Canada Canadian Customer?  Go to our Canadian Store

Customer Service 1-877-838-1399 - 8AM-5PM EST Mon-Thu & 8AM-4PM EST Fri

Cart

0 item (US$0.00)

X

You are currently searching with filters

Generator Stator For Polaris ATP Big Boss Magnum Ranger Scrambler Sportsman Worker 500 cc 1999-2004

RM01058
RMSTATOR

Generator Stator For Polaris ATP Big Boss Magnum Ranger Scrambler Sportsman Worker 500 cc 1999-2004

RM01058
RMSTATOR

Availability: In stock

Price: US$159.00

OR

Brand new generator stator

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation.
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Pick up pulsar coil included
  • Connector included
  • Rubber grommet included
  • All product shipped are tested
  • One year limited warranty

(Polaris often uses two to three stators for the same model)

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Details

Brand new generator stator

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation.
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Pick up pulsar coil included
  • Connector included
  • Rubber grommet included
  • All product shipped are tested
  • One year limited warranty

(Polaris often uses two to three stators for the same model)

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Videos

Specifications

Dimensions :
Interior diameter : 47mm
Exterior diameter : 114mm
Thickness : 20mm
Length of wires stator to grommet : 155mm
Length of wires grommet to plug : 900mm
Length of pickup coil's wire to grommet : 60mm

Other specifications :
Number of wires : 7
Number of plugs : 9
Number of pins : 12

Wire to wire resistance :
Alternator : Yellow/Red to Yellow = 0.4ohms +/-20%
Pickup : White/Red to Red = 115ohms +/-20%
Source : Black to Red = 18ohms +/-20%

OEM # Replacement

3087168

Fits models

Installation instructions

Before installing your new stator
  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

Reviews

Q&A

3 5 1