Menu

Canada Canadian Customer?  Go to our Canadian Store

Customer Service 1-877-838-1399 - 8AM-5PM EST Mon-Thu & 8AM-4PM EST Fri

Cart

0 item (US$0.00)

X

You are currently searching with filters

Generator Stator For Kawasaki ZN 1300 Voyager 1983-1988

RMS010-102015
RMSTATOR

Generator Stator For Kawasaki ZN 1300 Voyager 1983-1988

RMS010-102015
RMSTATOR
Exact fit

Availability: In stock

Price: US$129.00

OR

Brand new aftermarket stator

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation.
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Connector included
  • Rubber grommet included
  • All products shipped are tested
  • One year limited warranty

We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

*Beware, the KAWASAKI ZN1300 Voyager has two stators, this one is the biggest of the two (right side). See RM01038 for small one (left side).


Battery condition is important. No stator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it. ALWAYS START WITH A FULLY CHARGED BATTERY !

Details

Brand new aftermarket stator

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation.
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Connector included
  • Rubber grommet included
  • All products shipped are tested
  • One year limited warranty

We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

*Beware, the KAWASAKI ZN1300 Voyager has two stators, this one is the biggest of the two (right side). See RM01038 for small one (left side).


Battery condition is important. No stator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it. ALWAYS START WITH A FULLY CHARGED BATTERY !

Videos

Specifications

Dimensions :
Interior diameter : 38 mm
Exterior diameter : 103 mm
Thickness : 25 mm
Length of wires stator to grommet : 135 mm
Length of wires grommet to plug : 910 mm

Other specifications :
Number of wires : 4
Number of plugs : 2
Number of pins : 3

Wire to wire resistance :
Alternator : Black between each black = 0.7 ohms +/-20%

OEM # Replacement

21003-1071
21003-1104

Fits models

Installation instructions

Before installing your new stator

  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.

Reviews

Q&A