Ignition Coil for Johnson / Evinrude 2 3 4 5 6 9 10 15 18 20 25 28 30 33 35 hp Mercury 3 7.5 10 40 hp 1949-1990 | 584477

$USD 19.00
Availability: In stock
SKU
RMS060-105990
0584477
0582995
0582931
0582370
802371
802371A1

Dimensions:
Width: 45 mm
Length: 90 mm
Height: 38 mm
Wires length: Green: 80 mm Black: 60 mm
Fixation holes center to center: 68 mm
Resistance: Black to Green 0.8 ohms

Remove the yellow wire from the external ignition coil, if it is not applicable to your model.

After installing the coil, the armature plate should be rotated over its full range of travel to insure that it turns freely when the motor is running. If there is any interference, the coil mounting screws should be checked to see if they are contacting the top of the cylinder and the crankcase. If they are, remove the mounting screws and grind or file the end of each screw to eliminate interference. After shortening the screws, each tip should be ground to a slight point to facilitate reassembly of the coil. To keep the existing threads free of metal particles during grinding or filing, attach a 10-24 nut to the screw prior to grinding. After the modification is completed, remove the nut from the screw and reassemble the coil.

Brand new aftermarket Ignition Coil

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation
  • All products shipped are tested

*All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

Write Your Own Review
You're reviewing:Ignition Coil for Johnson / Evinrude 2 3 4 5 6 9 10 15 18 20 25 28 30 33 35 hp Mercury 3 7.5 10 40 hp 1949-1990 | 584477
Your Rating
Customers Also Viewed
Currently there is no product to display.