Voltage Regulator Rectifier for Yamaha WR 250 WR 400 WT 426 2000-2002

CAD$ 80.00
Availability: In stock
SKU
RM30911

Battery condition is extremely important. No voltage regulator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

5GS-81910-50-00

Dimensions :
Width : 45mm
Length : 70mm
Height: 20mm
Fixation holes center to center : 60mm
Wires length: 150mm

Other specifications :
Number of plugs : 1
Number of pins : 2
Number of wires: 2
Minimum Charging Voltage: 13V +/- 0.5V
Maximum Charging Current: 6A-10A/50W-200W
Open Circuit Voltage: <15V
Operation Temperature: -20⁰ to 85⁰

Before installing your new regulator/rectifier:
  • Bolt regulator to frame
  • Ground Black wire to Frame or Harness Ground
  • Connect Yellow Wire to AC Output lead of the Stator

Heavy Duty AC Voltage Regulator Rectifier

  • 12 Volts regulator used by Baja winners.
  • Heavy duty and improved regulator rectifier.
  • For use with all standard halogen and quartz lights.
  • Precise voltage control, eliminates light burnout.
  • Reduce flickering and dimming
  • Simple installation.
  • Works with all other OEM part.
  • Rated at 225 watts.
  • All products are tested before they are shipped.

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Please note: the body is different than the OEM (fix it with only one screw instead of two), but it works on the same models.
Please note : this regulator as two wires, yellow to power and black to ground.

Write Your Own Review
You're reviewing:Voltage Regulator Rectifier for Yamaha WR 250 WR 400 WT 426 2000-2002
Your Rating
Customers Also Viewed
Currently there is no product to display.