0 item (CA$0.00)
Brand new aftermarket voltage regulator rectifier
- Direct replacement to your original unit.
- Plug-and-play, direct fit, easy installation.
- No assembly required
- Higher grade of electric components.
- Improved heat sink and charging capabilities
- The quality exceeds the OEM equipment
- All products shipped are tested
We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.
All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.
Battery condition is extremely important. No voltage regulator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
Details
Brand new aftermarket voltage regulator rectifier
- Direct replacement to your original unit.
- Plug-and-play, direct fit, easy installation.
- No assembly required
- Higher grade of electric components.
- Improved heat sink and charging capabilities
- The quality exceeds the OEM equipment
- All products shipped are tested
We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.
All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.
Battery condition is extremely important. No voltage regulator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
Specifications
Width : 50mm
Length : 75mm
Height: 25mm
Fixation holes center to center : 60mm
Wires length: 200mm
Other specifications :
Number of plugs : 2
Number of pins : 5
OEM # Replacement
32800-33C00
32800-33C01
Fits models
- Motorcycle
- 2002
- Suzuki
- 2001
- Suzuki
- 2000
- Suzuki
- GS 500 E
- Suzuki
- 1999
- Suzuki
- GS 500 E
- Suzuki
- 1998
- Suzuki
- GS 500 E
- Suzuki
- 1997
- Suzuki
- GS 500 E
- Suzuki
- 1996
- Suzuki
- GS 500 E
- Suzuki
- 1995
- Suzuki
- GS 500 E
- Suzuki
- 1994
- Suzuki
- GS 500 E
- Suzuki
- 1993
- Suzuki
- GS 500 E
- GSF 400 Bandit
- Suzuki
- 1992
- Suzuki
- GS 500 E
- GSF 400 Bandit
- Suzuki
- 1991
- Suzuki
- DR 650 S
- GS 500 E
- GSF 400 Bandit
- Suzuki
- 1990
- Suzuki
- DR 650 S
- GS 500 E
- Suzuki
- 1989
- Suzuki
- GS 500 E
- Suzuki
- 1988
- Suzuki
- GS 500 E
- Suzuki
- 2002
Installation instructions
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors.