0 item (CA$0.00)
Brand new aftermarket voltage regulator rectifier
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation
- No assembly required
- Higher grade of electric components
- The quality exceeds the OEM equipment
- All products shipped are tested
All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.
Battery condition is extremely important. No voltage regulator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
Details
Brand new aftermarket voltage regulator rectifier
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation
- No assembly required
- Higher grade of electric components
- The quality exceeds the OEM equipment
- All products shipped are tested
All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.
Battery condition is extremely important. No voltage regulator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
Specifications
Width: 66 mm
Length: 83 mm
Height: 22 mm
Wires length: 110 mm
Fixation holes center to center: 65 mm
Other specifications:
Number of plugs: 1
Number of pins: 1
Number of wires: 2
OEM # Replacement
Fits models
- Snowmobile
- 2004
- Arctic Cat
- Bearcat 570 Carb F/C
- King Cat 900 Carb L/C
- Mountain Cat 570 Carb F/C
- Mountain Cat 600 EFI L/C
- Mountain Cat 900 Carb L/C
- Z 570 Carb F/C
- ZR 900 Carb L/C
- ZR 900 Sno Pro Carb L/C
- Arctic Cat
- 2003
- Arctic Cat
- Mountain Cat 570 Carb F/C
- Mountain Cat 600 EFI L/C
- Mountain Cat 900 Carb L/C
- Z 570 Carb F/C
- ZL 600 EFI L/C
- ZL 600 SS INTL
- ZR 900 Carb L/C
- ZR 900 Sno Pro Carb L/C
- Arctic Cat
- 2002
- Arctic Cat
- Mountain Cat 1000 Carb L/C
- Mountain Cat 570 Carb F/C
- Mountain Cat 600 EFI L/C
- Mountain Cat 800 Carb L/C
- Thundercat 1000 Carb L/C
- Z 570 Carb F/C
- Z 570 SS Carb F/C
- ZL 600 EFI L/C
- ZL 600 SS
- ZL 600 SS INTL
- ZR 600 EFI L/C
- ZR 800 Carb L/C
- Arctic Cat
- 2001
- Arctic Cat
- Mountain Cat 1000 Carb L/C
- Mountain Cat 500 EFI L/C
- Mountain Cat 600 EFI L/C
- Mountain Cat 800 Carb L/C
- Thundercat 1000 Carb L/C
- ZL 600 EFI L/C
- ZR 440 Sno Pro Carb L/C
- ZR 500 EFI L/C
- ZR 500 ESR EFI L/C
- ZR 600 EFI L/C
- ZR 800 Carb L/C
- ZRT 800 Carb L/C
- Arctic Cat
- 2004
Installation instructions
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors.