USA & International Customer?
English, Worldwide
0 item (CA$0.00)
Brand new stator
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation.
- Highest grade lamination materials
- Highest grade copper windings, resistant to 200 degrees Celsius.
- Connector included
- All product shipped are tested
- One year limited warranty
*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
Details
Brand new stator
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation.
- Highest grade lamination materials
- Highest grade copper windings, resistant to 200 degrees Celsius.
- Connector included
- All product shipped are tested
- One year limited warranty
*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
Videos
How Charging / Ignition / Starting Systems Work
How to repair your connectors like a pro!
RMSTATOR Corporate Video
Specifications
Dimensions :
Interior diameter : 42 mm
Exterior diameter : 103 mm
Thickness : 15 mm
Length of wires stator to plug 1: 200 mm
Length of wires stator to plug 2: 370 mm
Other specifications :
Number of wires : 6
Number of plugs : 2
Number of pins : 6
Wire to wire resistance :
Alternator : Yellow to Yellow = 0.4 ohms +/-20%
Source : Black/Red to Red = 13 ohms +/-20%
OEM # Replacement
410922100
410922905
410922904
410922905
410922904
Fits models
- Snowmobile
- 2000
- Ski-doo
- Formula 500 Carb L/C
- Formula 500 Deluxe Carb L/C
- Skandic 500 SWT Carb L/C
- Skandic 500 WT Carb L/C
- Touring 500 Carb L/C
- Ski-doo
- 1999
- Ski-doo
- Formula 500 Deluxe Carb L/C
- Formula 583 Carb L/C
- Formula 670 Carb L/C
- Formula Z 500 Carb L/C
- Formula Z 583 Carb L/C
- Formula Z 670 Carb L/C
- Grand Touring 500 Carb
- Grand Touring 583 Carb L/C
- MX Z 500 Carb L/C
- MX Z 670 HO Carb L/C
- Skandic 500 SWT Carb L/C
- Skandic 500 WT Carb L/C
- Summit 500 Carb L/C
- Summit 670 X Carb L/C
- Ski-doo
- 1998
- Ski-doo
- Formula 500 Carb L/C
- Formula 500 Deluxe Carb L/C
- Formula 583 Carb L/C
- Formula Z 583 Carb L/C
- Formula Z 670 Carb L/C
- Grand Touring 500 Carb
- Grand Touring 583 Carb L/C
- MX Z 500 Carb L/C
- MX Z 580 Carb L/C
- MX Z 670 Carb L/C
- Skandic 500 SWT Carb L/C
- Skandic 500 WT Carb L/C
- Summit 500 Carb L/C
- Summit 583 Carb L/C
- Summit 670 Carb L/C
- Summit 670 X Carb L/C
- Ski-doo
- 2000
Installation instructions
Before installing your new stator
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".