Generator Stator for BMW S1000R 2013-2018 | S1000RR 2009-2018 | HP4 1000 2012-2015 2017-2018 | OEM Repl.# 12317718420
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
- 2018 BMW S 1000 RR
- 2018 BMW S 1000 R
- 2018 BMW HP 4 1000 EFI
- 2017 BMW S 1000 RR
- 2017 BMW S 1000 R
- 2017 BMW HP 4 1000 EFI
- 2016 BMW S 1000 RR
- 2016 BMW S 1000 R
- 2015 BMW S 1000 RR
- 2015 BMW S 1000 R
- 2015 BMW HP 4 1000 EFI
- 2014 BMW S 1000 RR
- 2014 BMW S 1000 R
- 2014 BMW HP 4 1000 EFI
- 2013 BMW S 1000 RR
- 2013 BMW S 1000 R
- 2013 BMW HP 4 1000 EFI
- 2012 BMW S 1000 RR
- 2012 BMW HP 4 1000 EFI
- 2011 BMW S 1000 RR
- 2010 BMW S 1000 RR
- 2009 BMW S 1000 RR
Dimensions :
Interior diameter : 38 mm
Exterior diameter : 104 mm
Thickness : 13 mm
Length of wires stator to grommet : 75 mm
Length of wires grommet to plug : 670 mm
Other specifications :
Number of wires : 3
Number of plugs : 1
Number of pins : 3
Wire to wire resistance :
Alternator : Between each Grey = 0.4 ohms +-20%
Before installing your new stator
- Check the AC output of the stator
- Replace any burned or corroded connectors on stator and regulatorrectifier
- Check and repair any melted wiring
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
Brand new aftermarket stator
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation
- Highest grade of lamination materials
- Highest grade of copper winding, resistant to 200 degrees Celsius
- Connector included
- Rubber grommet included
- All products shipped are tested
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.