Menu

Worldwide USA & International Customer?  Go to International Store

X

Based on your location and your browser preferences, we suggest the following regional preferences:

English, Worldwide

Customer Service 1-877-838-1399 - 8AM-5PM EST Mon-Thu & 8AM-4PM EST Fri

Cart

0 item (CA$0.00)

X

You are currently searching with filters

Stator For Kohler Tractor 15 AMP / 20 AMP Command Pro CH11-CH25 CV11-CV22 CV18-CV22 K-Series K181 K241 K301-K341

RMS010-102722
RMSTATOR

Stator For Kohler Tractor 15 AMP / 20 AMP Command Pro CH11-CH25 CV11-CV22 CV18-CV22 K-Series K181 K241 K301-K341

RMS010-102722
RMSTATOR

Availability: In stock

Price: CA$90.00

OR

Brand new aftermarket stator

  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • All products shipped are tested
  • One year limited warranty

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.


Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Details

Brand new aftermarket stator

  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • All products shipped are tested
  • One year limited warranty

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.


Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Videos

Specifications

Dimensions :
Interior diameter : 78 mm
Exterior diameter : 138 mm
Thickness : 10 mm
Length of wires stator to terminals : 650 mm

Other specifications :
Number of wires : 2
Number of pins : 2

Wire to wire resistance :
Alternator : White to White = 0.4 ohms +-20%

OEM # Replacement

237878-S
234859
237329
237330
237331
237399
237716
4108507
4708501
4708511
5475509-S
A-237329
055-489

Fits models

Installation instructions

Before working on the engine or equipment, disable the engine as follow :

  • Disconnect the spark plug lead(s)
  • Disconnect negative (-) battery cable from battery

Before installing your new stator

  • Disconnect the stator wires from connector (if used), and remove the mounting screws and old stator assembly. Save the screws.
  • Measure the leads of the old stator. Cut the leads and protective sleeve of new stator to the same length.
  • Strip approximately 3/16" of the wire insulation, then crimp and solder the terminals to the stator wires. Make sure each connection is positively secured.
  • Apply pipe sealant with Teflon (Loctite No. 59241 or equivalent) to the stator mounting holes.
  • Install the new stator and secure with the original mounting screws. Torque the screws to 6.2 N m (55 in. lb.) Attach stator wires to original connector (if used).

Reviews

Q&A