Menu

Worldwide USA & International Customer?  Go to International Store

X

Based on your location and your browser preferences, we suggest the following regional preferences:

English, Worldwide

Customer Service 1-877-838-1399 - 8AM-5PM EST Mon-Thu & 8AM-4PM EST Fri

Cart

0 item (CA$0.00)

X

You are currently searching with filters

Kit Stator / Gasket / External Ignition Coil Yamaha YFM 350 Warrior 1988-1989

RM22865
RMSTATOR

Kit Stator / Gasket / External Ignition Coil Yamaha YFM 350 Warrior 1988-1989

RM22865
RMSTATOR

This product is discontinued. It has been replaced by the RM22864


RM22864 Kit Stator + Gasket + External Ignition Coil Yamaha YFM 350 Warrior 1987-1989

YOU SAVE 5% off the items price combined, when buying a kit.

Brand new stator external ignition coil and gasket kit

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation.
  • All product shipped are tested
  • One year limited warranty

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

If your old parts are defective, RM Stator offer replacements parts of high qualities at a fraction of the cost of genuine parts.

Stator
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Pick up pulsar coil included
  • Connector included
  • Rubber grommet included
  • gasket included

At RMSTATOR, we believe that proper installation guarantees a longer lifetime. This is why we include, at no extra charge, a stator cover gasket and a dielectric grease tube.
Consult the connectors circle of death for more information on dielectric grease.

External ignition coil
  • Highest grade lamination materials.
  • The Quality exceeds the OEM equipment
  • Spark plug cap(s) included

Details

YOU SAVE 5% off the items price combined, when buying a kit.

Brand new stator external ignition coil and gasket kit

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation.
  • All product shipped are tested
  • One year limited warranty

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

If your old parts are defective, RM Stator offer replacements parts of high qualities at a fraction of the cost of genuine parts.

Stator
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Pick up pulsar coil included
  • Connector included
  • Rubber grommet included
  • gasket included

At RMSTATOR, we believe that proper installation guarantees a longer lifetime. This is why we include, at no extra charge, a stator cover gasket and a dielectric grease tube.
Consult the connectors circle of death for more information on dielectric grease.

External ignition coil
  • Highest grade lamination materials.
  • The Quality exceeds the OEM equipment
  • Spark plug cap(s) included

Videos

Specifications

Stator
Number of wires : 9
Number of terminals : 8
Alternator : White to White = 0.9 ohms +/-20%
Alternator : White between Ground = O.L. ON DISPLAY
Pick up 1 : Blue to Red = 200 ohms +/-20%
Pick up 2 : Orange to White = 200 ohms +/-20% Source 1 : Green to Brown = 315 ohms +/-20%

External ignition coil
Bracket to bracket center 55 mm

OEM # Replacement

Stator
2XK-85510-20-00

External Ignition Coil
3GD-82310-10-00

Installation instructions

Before installing your new stator
  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

External ignition coil
Remove the yellow wire from the external ignition coil, if it is not applicable to your model.

Reviews

Q&A