Menu

Worldwide USA & International Customer?  Go to International Store

X

Based on your location and your browser preferences, we suggest the following regional preferences:

English, Worldwide

Customer Service 1-877-838-1399 - 8AM-5PM EST Mon-Thu & 8AM-4PM EST Fri

Cart

0 item (CA$0.00)

X

You are currently searching with filters

Kit High Output Stator 140 W + Voltage Regulator Rectifier For Yamaha YFZ 450 2004-2009

RM22430
RMSTATOR

Kit High Output Stator 140 W + Voltage Regulator Rectifier For Yamaha YFZ 450 2004-2009

RM22430
RMSTATOR

Availability: In stock

Price: CA$184.00

OR
YOU SAVE 5% off the items price combined, when buying a kit.

Brand new HO stator pick up coils and heavy duty regulator rectifier kit

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation.
  • All product shipped are tested
  • One year limited warranty

We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.

*All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.

High output stator
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Pick up pulsar coil included
  • Connector included
  • Rubber grommet included
  • Back Plate included

20% MORE OUTPUT OVER STOCK, WORKS WITH ALL OTHER OEM COMPONENTS.

Heavy duty voltage regulator rectifier
  • The Quality exceeds the OEM equipment
  • Improved heat sink and charging capabilities
  • Higher grade of electric components.

Details

YOU SAVE 5% off the items price combined, when buying a kit.

Brand new HO stator pick up coils and heavy duty regulator rectifier kit

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation.
  • All product shipped are tested
  • One year limited warranty

We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.

*All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.

High output stator
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Pick up pulsar coil included
  • Connector included
  • Rubber grommet included
  • Back Plate included

20% MORE OUTPUT OVER STOCK, WORKS WITH ALL OTHER OEM COMPONENTS.

Heavy duty voltage regulator rectifier
  • The Quality exceeds the OEM equipment
  • Improved heat sink and charging capabilities
  • Higher grade of electric components.

Videos

Specifications

Stator
Pickup : White to Red = 275 ohms
Alternator : White to Yellow = 3.0 ohms O.L TO GROUNG

Voltage regulator rectifier
Dimensions :
Width : 63mm
Length : 78mm
Height: 26mm
Fixation holes center to center : 60mm
Wires length: 450mm

Other specifications :
Number of plugs : 1
Number of pins : 4

OEM # Replacement

High Output Stator :
5TG-81410-01-00
5TG-81410-00-00
5TG-81410-02-00
5TG-81410-10-00

Regulator Rectifier :
5TG-81960-00-00

Fits models

Installation instructions

Before installing your new stator:
  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code then youメre original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010.

Before installing your new regulator/rectifier:

  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors.

Reviews

Q&A