Menu

Worldwide USA & International Customer?  Go to International Store

X

Based on your location and your browser preferences, we suggest the following regional preferences:

English, Worldwide

Customer Service 1-877-838-1399 - 8AM-5PM EST Mon-Thu & 8AM-4PM EST Fri

Cart

0 item (CA$0.00)

X

You are currently searching with filters

USED - STATOR

RM01339U
RMSTATOR

USED - STATOR

RM01339U
RMSTATOR

Availability: Out of stock

Price: CA$105.00

  • You must re-install your original connector (see picture).
  • Once your connector is re-installed, our part becomes a Plug-and-play unit, direct fit, and very easy to install.
  • Pick up pulsar coil included
  • Grommet included
  • Higher grade of electronic components.
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • All products shipped are tested
  • One year limited warranty
 

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Details

  • You must re-install your original connector (see picture).
  • Once your connector is re-installed, our part becomes a Plug-and-play unit, direct fit, and very easy to install.
  • Pick up pulsar coil included
  • Grommet included
  • Higher grade of electronic components.
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • All products shipped are tested
  • One year limited warranty
 

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Videos

Specifications

Five wires

Five terminals

ALTERNATOR White Between each White 0.6 ohms ±20%

ALTERNATOR White to Ground O.L ON DISPLAY

PICK UP COIL Black to White 185 ohms ±20%


OEM # Replacement


Before installing your new stator

  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

 

The three alternator wires (same color) have no specific order. All of the wires are installed in the correct order; please do not change any of the wiring configurations.

This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.

If our stator includes a pickup coil, always make sure the air gap is correct. We suggest as close as possible no less than 0.010’’.



8es-81410-00-00
8gc-81410-00-00
8gc-81410-10-00

Installation instructions

Before installing your  stator

  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

 

The three alternator wires (same color) have no specific order. All of the wires are installed in the correct order; please do not change any of the wiring configurations.

This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.

If our stator includes a pickup coil, always make sure the air gap is correct. We suggest as close as possible no less than 0.010’’.


Reviews

Q&A