Menu

Worldwide USA & International Customer?  Go to International Store

X

Based on your location and your browser preferences, we suggest the following regional preferences:

English, Worldwide

Customer Service 1-877-838-1399 - 8AM-5PM EST Mon-Thu & 8AM-4PM EST Fri

Cart

0 item (CA$0.00)

X

You are currently searching with filters

Stator Yamaha Bravo 250 Carb F/C 1985-1987 Bravo 250 LT Carb F/C 1986-1987

RM01130
RMSTATOR

Stator Yamaha Bravo 250 Carb F/C 1985-1987 Bravo 250 LT Carb F/C 1986-1987

RM01130
RMSTATOR

Availability: In stock

Price: CA$209.00

OR

Brand new stator

  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius
  • The quality exceeds the OEM equipment
  • Rubber grommet included
  • Back Plate included
  • All product shipped are tested
  • One year limited warranty

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Details

Brand new stator

  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius
  • The quality exceeds the OEM equipment
  • Rubber grommet included
  • Back Plate included
  • All product shipped are tested
  • One year limited warranty

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Videos

Specifications

Wire to wire resistance
Alternator : Black to Yellow = 0.4 ohms +/- 20 %
Pikup Coil : Black to Red/White = 26 ohms +/- 20%
Source : Black to Brown = 3.75 ohms +/- 20%

Dimension
Interior diameter : 35 mm
Exterior diameter : 95 mm
Thickness : 22 mm

Number of wires : 4
Number of terminals : 4

OEM # Replacement

8R4-85560-M0-00

Fits models

Installation instructions

Before installing your new stator
  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.

Reviews

Q&A