Stator Pick-up Pulsar Coil for Yamaha YFM 550 / 700 Grizzly | YFM 700 Kodiak 2007-2024 | OEM Repl.# 3B4-81410-00-00
CAD$ 46.00
Availability: In stock
SKU
RM00107
- 2024 Yamaha YFM 700 Kodiak
- 2024 Yamaha YFM 700 Grizzly
- 2023 Yamaha YFM 700 Kodiak
- 2023 Yamaha YFM 700 Grizzly
- 2022 Yamaha YFM 700 Kodiak
- 2022 Yamaha YFM 700 Grizzly
- 2021 Yamaha YFM 700 Kodiak
- 2021 Yamaha YFM 700 Grizzly
- 2020 Yamaha YFM 700 Kodiak
- 2020 Yamaha YFM 700 Grizzly
- 2019 Yamaha YFM 700 Kodiak
- 2019 Yamaha YFM 700 Grizzly
- 2018 Yamaha YFM 700 Grizzly
- 2017 Yamaha YFM 700 Grizzly
- 2016 Yamaha YFM 700 Grizzly
- 2015 Yamaha YFM 700 Grizzly
- 2014 Yamaha YFM 700 Grizzly
- 2014 Yamaha YFM 550 Grizzly
- 2013 Yamaha YFM 700 Grizzly
- 2013 Yamaha YFM 550 Grizzly
- 2012 Yamaha YFM 700 Grizzly
- 2012 Yamaha YFM 550 Grizzly
- 2011 Yamaha YFM 700 Grizzly
- 2011 Yamaha YFM 550 Grizzly
- 2010 Yamaha YFM 700 Grizzly
- 2010 Yamaha YFM 550 Grizzly
- 2009 Yamaha YFM 700 Grizzly
- 2009 Yamaha YFM 550 Grizzly
- 2008 Yamaha YFM 700 Grizzly
- 2007 Yamaha YFM 700 Grizzly
28P-81410-00-00
28P-81410-01-00
3B4-81410-00-00
28P-81410-01-00
3B4-81410-00-00
Dimensions:
Height: 19 mm
Length: 23 mm
Width: 19 mm
Bracket center to center: 35 mm
Wires length : 800 mm
Other specifications:
Number of wires : 2
Number of pins: 2
Wire to wire resistance:
Red to White = 500 ohms +/-20%
Height: 19 mm
Length: 23 mm
Width: 19 mm
Bracket center to center: 35 mm
Wires length : 800 mm
Other specifications:
Number of wires : 2
Number of pins: 2
Wire to wire resistance:
Red to White = 500 ohms +/-20%
Not following these instructions may result in damaging the part or other components on your vehicle.
- By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
- Insulate your solders with heat shrink.
- Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
- Rotate the flywheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010’’.
- If no spark or erratic spark, switch the wires at the plug.
Brand new pick up coil for Stator 500 ohms
- We offer a brand new pickup/pulsar coil for you to repair your stator.
- Often unavailable from the OEM manufacturer
- All products shipped are tested
*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Write Your Own Review