Voltage Regulator for BMW F650 Funduro F650ST 1993-2000 / Aprillia Moto 650 Pegaso 650 Leonardo 250 300 ST 1995-2005
Battery condition is extremely important. No voltage regulator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
- 2005 Aprilia Leonardo 300 ST
- 2004 Aprilia Pegaso 650 IE
- 2004 Aprilia Leonardo 300 ST
- 2004 Aprilia Leonardo 250 ST
- 2003 Aprilia Pegaso 650 IE
- 2003 Aprilia Leonardo 300 ST
- 2003 Aprilia Leonardo 250 ST
- 2002 Aprilia Pegaso 650 IE
- 2002 Aprilia Leonardo 300 ST
- 2002 Aprilia Leonardo 250 ST
- 2001 Aprilia Pegaso 650 IE
- 2001 Aprilia Leonardo 250 ST
- 2000 BMW F 650 ST
- 2000 BMW F 650 Funduro
- 2000 Aprilia Pegaso 650 IE
- 2000 Aprilia Pegaso 650
- 2000 Aprilia Leonardo 250 ST
- 1999 BMW F 650 ST
- 1999 BMW F 650 Funduro
- 1999 Aprilia Pegaso 650
- 1999 Aprilia Moto 650
- 1998 BMW F 650 ST
- 1998 BMW F 650 Funduro
- 1998 Aprilia Pegaso 650
- 1998 Aprilia Moto 650
- 1997 BMW F 650 ST
- 1997 BMW F 650 Funduro
- 1997 Aprilia Pegaso 650
- 1997 Aprilia Moto 650
- 1996 BMW F 650 Funduro
- 1996 Aprilia Pegaso 650
- 1996 Aprilia Moto 650
- 1995 BMW F 650 Funduro
- 1995 Aprilia Moto 650
- 1994 BMW F 650 Funduro
- 1993 BMW F 650 Funduro
AP8112941
Dimensions:
Width: 82 mm
Length: 89 mm
Height: 29 mm
Wires length: 130, 160, 195 mm
Fixation holes center to center: 68 mm
Other specifications:
Number of plugs: 2
Number of pins: 6
Number of wires: 6
Minimum Charging Voltage: 14.5V +- 0.5V
Maximum Charging Current: 50A/500W
Open Circuit Voltage: 15V
Operation Temperature: -20⁰ to 85⁰
Before installing your new voltage regulator rectifier:
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator rectifier.
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors.
Brand new aftermarket voltage regulator rectifier
- Direct replacement to your original unit.
- Plug-and-play, direct fit, easy installation.
- No assembly required
- Higher grade of electric components.
- The quality exceeds the OEM equipment
- All products shipped are tested
We have even included the opposite connector (main harness side) as we know these are often melted corroded defective and a major cause for repetitive electrical issues.
All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.