Stator Pickup Pulsar Coil for Arctic Cat 300 DVX 2009-2015

• 2015 Arctic Cat DVX 300
• 2014 Arctic Cat DVX 300
• 2013 Arctic Cat DVX 300
• 2012 Arctic Cat DVX 300
• 2011 Arctic Cat DVX 300
• 2010 Arctic Cat DVX 300
• 2009 Arctic Cat DVX 300

3305-627

Dimensions:
Wires length : 660 mm

Other specifications:

Wire to wire resistance:
Blue to Green = 135 ohms +/-20%

Not following these instructions may result in damaging the part or other components on your vehicle.

• By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
• Insulate your solders with heat shrink.
• Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
• Rotate the flywheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010’’.
• If no spark or erratic spark, switch the wires at the plug.