Menu

Worldwide USA & International Customer?  Go to International Store

X

Based on your location and your browser preferences, we suggest the following regional preferences:

English, Worldwide

Customer Service 1-877-838-1399 - 8AM-5PM EST Mon-Thu & 8AM-4PM EST Fri

Cart

0 item (CA$0.00)

X

You are currently searching with filters

Kit Stator + Voltage Regulator Rectifier + Magneto Flywheel For Ski Doo Tundra 300 R 1999-2005

RM22870
RMSTATOR

Kit Stator + Voltage Regulator Rectifier + Magneto Flywheel For Ski Doo Tundra 300 R 1999-2005

RM22870
RMSTATOR

Availability: In stock

Price: CA$640.30

OR
YOU SAVE 5% off the items price combined, when buying a kit.

Brand New Magneto Flywheel + Stator + Voltage Regulator Rectifier Kit

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation.
  • All products are tested
  • One year limited warranty

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Stator
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Back Plate included
  • Connector included

20% MORE OUTPUT OVER STOCK, WORKS WITH ALL OTHER OEM COMPONENTS.

Voltage Regulator Rectifier
  • No assembly required
  • Higher grade of electric components.
  • The quality exceeds the OEM equipment

Details

YOU SAVE 5% off the items price combined, when buying a kit.

Brand New Magneto Flywheel + Stator + Voltage Regulator Rectifier Kit

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation.
  • All products are tested
  • One year limited warranty

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Stator
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Back Plate included
  • Connector included

20% MORE OUTPUT OVER STOCK, WORKS WITH ALL OTHER OEM COMPONENTS.

Voltage Regulator Rectifier
  • No assembly required
  • Higher grade of electric components.
  • The quality exceeds the OEM equipment

Videos

Specifications

Stator

Dimensions :
Interior diameter : 43 mm
Exterior diameter : 110 mm
Thickness : 32 mm
Length of wires stator to grommet : 500mm

Other specifications :
Number of wires : 7
Number of plugs : 2
Number of pins : 7

Wire to wire resistance :
Alternator : Yellow to Yellow = 0.4 ohms +/-20%
Alternator : Yellow to Grounf = 0.L Source : Red to Black = 80 ohms +/-20%

Voltage Regulator Rectifier

Dimensions:
Width: 41 mm
Length: 41 mm
Height: 21 mm
Wires length: 95 mm
Fixation hole center to edge: 20 mm

Other specifications:
Number of plugs: 1
Number of pins: 3
Number of wires: 4

Flywheel

Dimensions:
Exterior Diameter: 117 mm
Interior Diameter: 96 mm
Interior Diameter Center Housing: 24 mm
Exterior Diameter Center Housing: 35 mm
Thickness (exterior): 46 mm
Thickness (interior): 23 mm

OEM # Replacement

Stator
410922749
420886602
420886608
420889365
420886603
420889366
420889368
420889369

Voltage Regulator Rectifier
515163800
410110600

Flywheel
420996829

Fits models

Installation instructions

Stator + Voltage Regulator Rectifier

Before installing your new stator and voltage regulator rectifier

  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.

Flywheel

Before attempting to start your Ski Doo Tundra 300, adjusting the air gap is necessary. Rotate the flywheel so the raised node is lined up with the pick up/pulser coil and adjust as close as possible but no less than 0.010’’.

Reviews

Q&A