Menu

Worldwide USA & International Customer?  Go to International Store

X

Based on your location and your browser preferences, we suggest the following regional preferences:

English, Worldwide

Customer Service 1-877-838-1399 - 8AM-5PM EST Mon-Thu & 8AM-4PM EST Fri

Cart

0 item (CA$0.00)

X

You are currently searching with filters

Kit Stator + Voltage Regulator Rectifier For Honda CB 360 CL 360 Scrambler 1974-1977

RM22436
RMSTATOR

Kit Stator + Voltage Regulator Rectifier For Honda CB 360 CL 360 Scrambler 1974-1977

RM22436
RMSTATOR

Availability: In stock

Price: CA$259.00

OR
Save 5 % off the items priced combined, when buying a kit

Brand New Kit Stator + Voltage Regulator Rectifier

  • Direct replacement to your original unit.
  • Plug-and-play, direct fit, easy installation.
  • All products shipped are tested
  • One year limited warranty

All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.

Stator:
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Connector included
  • Rubber grommet included
  • Brand new aftermarket voltage regulator rectifier
    • No assembly required
    • Higher grade of electric components.
    • Charging capabilities
    • The quality exceeds the OEM equipment

    We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.

    Details

    Save 5 % off the items priced combined, when buying a kit

    Brand New Kit Stator + Voltage Regulator Rectifier

    • Direct replacement to your original unit.
    • Plug-and-play, direct fit, easy installation.
    • All products shipped are tested
    • One year limited warranty

    All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.

    Stator:
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Connector included
  • Rubber grommet included
  • Brand new aftermarket voltage regulator rectifier
    • No assembly required
    • Higher grade of electric components.
    • Charging capabilities
    • The quality exceeds the OEM equipment

    We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.

    Videos

    Specifications

    Dimensions Stator :
    Interior diameter : 80mm
    Exterior diameter : 130mm
    Thickness : 35mm
    Length of wires stator to grommet : 15mm
    Length of wires grommet to plug : 340mm

    Other specifications :
    Number of wires : 2
    Number of plugs : 2
    Number of pins : 2

    Wire to wire resistance :
    Alternator : Black to Black = 0.4ohms +/-20%

    Dimensions Voltage Regulator Rectifier :
    Width : 58mm
    Length : 68mm
    Height: 25mm
    Fixation holes center to center : 53mm
    Wires length: 300mm 600mm

    Other specifications :
    Number of wires: 4
    Number of plugs : 4
    Number of pins : 4

    OEM # Replacement

    Stator:
    31100-369-004
    31102-369-004

    Voltage Regulator Rectifier:
    31700-358-305
    31700-358-003
    31700-358-013

    Fits models

    Installation instructions

    Before installing your new stator

    • Check the AC output of the stator.
    • Replace any burned or corroded connectors on stator and regulator/rectifier
    • Check and repair any melted wiring.
    • Use hi-temp dielectric grease on all connectors

    Our stator may use a different wire color code than your original.
    All of the wires are installed in the correct order; please do not change any of the wiring configurations.
    This stator is designed as a direct plug-in replacement and should be used as such.
    When bolting stator in, always use locking compound.
    If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.

    Before installing your new voltage regulator rectifier;
    • Check the AC output of the stator.
    • Replace any burned or corroded connectors on stator and regulator/rectifier
    • Check and repair any melted wiring.
    • Use hi-temp dielectric grease on all connectors.

    Reviews

    Q&A