Menu

Worldwide USA & International Customer?  Go to International Store

X

Based on your location and your browser preferences, we suggest the following regional preferences:

English, Worldwide

Customer Service 1-877-838-1399 - 8AM-5PM EST Mon-Thu & 8AM-4PM EST Fri

Cart

0 item (CA$0.00)

X

You are currently searching with filters

Kit Stator + Flywheel + Crankcase Cover Gasket + Ignition Cap Coil For Ski Doo GSX/GTX/MX Z 1200 TNT EFI L/C 2009-2015

RM22871
RMSTATOR

Kit Stator + Flywheel + Crankcase Cover Gasket + Ignition Cap Coil For Ski Doo GSX/GTX/MX Z 1200 TNT EFI L/C 2009-2015

RM22871
RMSTATOR

Availability: Out of stock

Price: CA$548.15

YOU SAVE 5% off the items price combined, when buying a kit.

Brand New Kit Stator + Flywheel + Crankcase Cover Gasket + Ignition Cap Coil

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation.
  • All product shipped are tested
  • One year limited warranty

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Stator
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Connector included
  • Rubber grommet included
  • Crankcase cover gasket included
Ignition Cap Coil
  • The Quality exceeds the OEM equipment
  • 1 Cap coil included

If your OEM part is defective, RM Stator offers good quality replacement parts at a fraction of its original price.

*All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.

With certain Ski Doo models, the spark plug caps and coils are combined to reduce the number of parts used in order to improve efficiency. However, when the spark plug cap wears out, the cost of the replacement becomes more expensive. If you are experiencing ignition problems this could mean the ignition cap coil needs to be replaced. Simple, easy to install, affordable, and improves engine performance.

Magneto Flywheel Rotor

RMSTATOR is offering a new replacement flywheel for your Ski-doo. This flywheel can be used as a direct replacement to the OEM.

What is improved about the RM11503 flywheel?

Ski-doo 1200 snowmobiles are plagued with problems on the original flywheels. The additives in the motor oil were dissolving the epoxy that holds the magnets in the flywheel, causing them to detach and scatter throughout the engine.

The bad news is that by the time the problem occurred, no manufacturer would provide warranty repairs.

The good news is that RMSTATOR has manufactured a redesigned flywheel where the magnets are sealed in the flywheel, which reinforces the epoxy and prevents them from detaching. This new flywheel configuration corrects the problem permanently.

Dealership estimates to repair this failure are over $500 in parts alone. RMSTATOR offers you a high quality replacement part that corrects the problem for half the price. The RM11503 flywheel is not only a cost effective way to replace your failed Ski-doo flywheel, but a great investment when replaced before the failure occurs.

3 SEAL THAT PROTECTS THE MAGNET’S EPOXY FROM OIL ADDITIVES


improved-flywheel

Details

YOU SAVE 5% off the items price combined, when buying a kit.

Brand New Kit Stator + Flywheel + Crankcase Cover Gasket + Ignition Cap Coil

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation.
  • All product shipped are tested
  • One year limited warranty

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Stator
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Connector included
  • Rubber grommet included
  • Crankcase cover gasket included
Ignition Cap Coil
  • The Quality exceeds the OEM equipment
  • 1 Cap coil included

If your OEM part is defective, RM Stator offers good quality replacement parts at a fraction of its original price.

*All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.

With certain Ski Doo models, the spark plug caps and coils are combined to reduce the number of parts used in order to improve efficiency. However, when the spark plug cap wears out, the cost of the replacement becomes more expensive. If you are experiencing ignition problems this could mean the ignition cap coil needs to be replaced. Simple, easy to install, affordable, and improves engine performance.

Magneto Flywheel Rotor

RMSTATOR is offering a new replacement flywheel for your Ski-doo. This flywheel can be used as a direct replacement to the OEM.

What is improved about the RM11503 flywheel?

Ski-doo 1200 snowmobiles are plagued with problems on the original flywheels. The additives in the motor oil were dissolving the epoxy that holds the magnets in the flywheel, causing them to detach and scatter throughout the engine.

The bad news is that by the time the problem occurred, no manufacturer would provide warranty repairs.

The good news is that RMSTATOR has manufactured a redesigned flywheel where the magnets are sealed in the flywheel, which reinforces the epoxy and prevents them from detaching. This new flywheel configuration corrects the problem permanently.

Dealership estimates to repair this failure are over $500 in parts alone. RMSTATOR offers you a high quality replacement part that corrects the problem for half the price. The RM11503 flywheel is not only a cost effective way to replace your failed Ski-doo flywheel, but a great investment when replaced before the failure occurs.

3 SEAL THAT PROTECTS THE MAGNET’S EPOXY FROM OIL ADDITIVES


improved-flywheel

Videos

Specifications

Stator

Dimensions:
Interior diameter: 42mm
Exterior diameter: 114mm
Thickness: 19mm
Length of wires stator to grommet: 110mm
Length of wires grommet to plug: 600mm

Other specifications:
Number of wires: 3
Number of plugs: 1
Number of pins: 3

Wire to wire resistance:
Alternator: Yellow between each Yellow = 0.4ohms +/-20%

Ignition Cap Coil

Dimensions :
Internal tube diameter : 22mm

OEM # Replacement

Stator
420892370
420892371
420892374
420892376
420892373

Ignition Cap Coil
420665810

Magneto Flywheel Rotor
420892360
420892361
420892362
420892363

Crankcase Cover Gasket
420430750

Fits models

Installation instructions

Stator
Before installing your new stator
  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original. `
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.

Magneto Flywheel Rotor

Before attempting to start your Ski Doo adjusting the air gap is necessary.
Rotate the flywheel so the raised node is lined up with the pick up/pulser coil and adjust as close as possible but no less than 0.010’’

Reviews

Q&A