Kit Stator 200 W + Regulator Rectifier + Ignition Coil + Flywheel Puller for Yamaha YFZ 350 Banshee 1995-2006

CAD$ 359.00
Availability: In stock
SKU
RM22806
RM22806
Dimensions Stator :
Interior diameter : 103mm
Exterior diameter : 34mm
Thickness : 27mm
Length of wires stator to grommet : 60mm
Length of wires grommet to plug : 520mm
Length of pickup coil's wire to grommet : 80mm

Other specifications :
Number of wires : 6
Number of plugs : 3
Number of pins : 6

Wire to wire resistance :
Alternator : Yellow to Black = 0.4ohms +/-20%
Pickup : White/Green to White/Red = 115ohms +/-20%
Source : Green to Red = 12ohms +/-20%

Dimensions AC Regulator:
Height: 20 mm
Length: 45 mm
Width: 45 mm

Other specifications:
Number of terminals: 2
Wires length: 130 mm

External Ignition coil
Distance between fixation holes: 90mm
Before installing your new stator
  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

Check to be sure that all of the following is done to ensure that your AC regulator rectifier is installed properly:

  • Bolt regulator to frame
  • Ground Black wire to Frame or Harness ground
  • Connect yellow wire to AC output lead of the Stator

External Ignition Coil:
Remove the yellow wire from the external ignition coil, if it is not applicable to your model.

Brand New Kit Stator 200W + AC Regulator + External Ignition Coil + Flywheel Puller

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation
  • All shipped products are tested

All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

Brand New High Output Aftermarket Stator 200W :
  • Highest grade of lamination materials
  • Highest grade of copper winding, resistant to 200 degrees Celsius
  • Pick up pulsar coil included
  • Connector included
  • Rubber grommet included
  • Back Plate included

For a limited time we are including a FREE Tympanum AC regulator required to run the extra wattage supplied from our 200W stator :

  • 12 Volts regulator used by Baja winners
  • For use with all standard halogen and quartz lights
  • Precise voltage control, eliminates light burnout
  • Reduce flickering and dimming
  • Simple installation
  • Works with all other OEM parts
  • Rated at 225 watts
External Ignition Coil
  • Highest grade of lamination materials
  • Spark plug cap(s) included
Write Your Own Review
You're reviewing:Kit Stator 200 W + Regulator Rectifier + Ignition Coil + Flywheel Puller for Yamaha YFZ 350 Banshee 1995-2006
Your Rating
Customers Also Viewed
Currently there is no product to display.