Menu

Worldwide USA & International Customer?  Go to International Store

X

Based on your location and your browser preferences, we suggest the following regional preferences:

English, Worldwide

Customer Service 1-877-838-1399 - 8AM-5PM EST Mon-Thu & 8AM-4PM EST Fri

Cart

0 item (CA$0.00)

X

You are currently searching with filters

Kit Stator 200 W + HP CDI Box + External Ignition Coil For Honda ATC 250 R 1985

RM22971
RMSTATOR

Kit Stator 200 W + HP CDI Box + External Ignition Coil For Honda ATC 250 R 1985

RM22971
RMSTATOR

Availability: In stock

Price: CA$294.00

OR
YOU SAVE 5% off the items price combined, when buying a kit.

Brand New Kit High Output 200W Stator + High Performance CDI Box + External Ignition Coil

  • Direct replacement to your original unit
  • All product shipped are tested
  • One year limited warranty

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

High output stator 200 watts
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Pick up pulsar coil included
  • Connector included
  • Rubber grommet included
  • Back Plate included

20% More output over stock, works with all other OEM components.

High Performance CDI Box
  • Enhanced timing curve, increased rev limiter (approximately 1000 rpm)
  • Higher grade of electronic components.
  • The Quality exceeds the OEM equipment

External Ignition Coil
  • Highest grade lamination materials.
  • The Quality exceeds the OEM equipment
  • Spark plug cap(s) included

Details

YOU SAVE 5% off the items price combined, when buying a kit.

Brand New Kit High Output 200W Stator + High Performance CDI Box + External Ignition Coil

  • Direct replacement to your original unit
  • All product shipped are tested
  • One year limited warranty

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

High output stator 200 watts
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Pick up pulsar coil included
  • Connector included
  • Rubber grommet included
  • Back Plate included

20% More output over stock, works with all other OEM components.

High Performance CDI Box
  • Enhanced timing curve, increased rev limiter (approximately 1000 rpm)
  • Higher grade of electronic components.
  • The Quality exceeds the OEM equipment

External Ignition Coil
  • Highest grade lamination materials.
  • The Quality exceeds the OEM equipment
  • Spark plug cap(s) included

Videos

Specifications

High Ouptut Stator :
Interior diameter : 34mm
Exterior diameter : 88mm
Thickness : 17mm
Length of wires stator to grommet : 60mm
Length of wires grommet to plug : 60mm & 620mm
Length of pickup coil's wire to grommet : 80mm

Other specifications :
Number of wires : 4
Number of plugs : 3
Number of pins : 4

Wire to wire resistance :
Alternator : White to Ground = 0.4 ohms +/-20%
Pickup : Green to Blue = 115 ohms +/-20%
Source : Black/Red to Ground = 210 ohms +/-20%

CDI Box
Height: 23mm
Length: 65mm
Width: 37mm

Other specifications:
Number of plugs: 1
Number of pins: 6

The only real way to test your CDI box is to swap it out with another known good unit from the same year/make/model. Because of this, we recommend that you rule everything else out before replacing the CDI box.

OEM # Replacement

Stator
31120-HA2-671

CDI Box
30410-HA2-003

External Ignition Coil
30510-MK4-405

Fits models

Installation instructions

Before installing your new stator:
  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code then youメre original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010メメ.

CDI Box
Our CDI may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This CDI is designed as a direct plug-in replacement and should be used as such.

External ignition coil
Remove the yellow wire from the external ignition coil, if it is not applicable to your model.

Reviews

Q&A