Menu

Worldwide USA & International Customer?  Go to International Store

X

Based on your location and your browser preferences, we suggest the following regional preferences:

English, Worldwide

Customer Service 1-877-838-1399 - 8AM-5PM EST Mon-Thu & 8AM-4PM EST Fri

Cart

0 item (CA$0.00)

X

You are currently searching with filters

Kit Stator 100 W + High Performance CDI + Ignition Coil + Backplate + Flywheel For Yamaha YFZ 350 Banshee 1997-2006

RM23007
RMSTATOR

Kit Stator 100 W + High Performance CDI + Ignition Coil + Backplate + Flywheel For Yamaha YFZ 350 Banshee 1997-2006

RM23007
RMSTATOR

Availability: In stock

Price: CA$504.00

OR
YOU SAVE 5% off the items price combined, when buying a kit.

Brand New Kit Stator + High Performance CDI Box + External Ignition Coil + Flywheel

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation.
  • All product shipped are tested
  • One year limited warranty

*All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.

High Output Stator

  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Pick up pulsar coil included
  • Connector included
  • Rubber grommet included
  • Adjustable timing plate to advance and retard up to 10 degrees included

20% MORE OUTPUT OVER STOCK, WORKS WITH ALL OTHER OEM COMPONENTS.

High Performance CDI Box:

  • Enhanced timing curve, increased rev limiter (approximately 1000 rpm)
  • Higher grade of electronic components.

External Ignition Coil

  • Highest grade lamination materials.
  • Spark plug cap(s) included

Improved Stronger Magneto Flywheel Rotor
RMSTATOR is offering a new replacement flywheel with stronger magnets for your Banshee. This flywheel can be used as a direct replacement to the OEM.
We suggest combining it to our 100 or 200 watt stator as it will run the lights better in the lower rpm's.

Details

YOU SAVE 5% off the items price combined, when buying a kit.

Brand New Kit Stator + High Performance CDI Box + External Ignition Coil + Flywheel

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation.
  • All product shipped are tested
  • One year limited warranty

*All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.

High Output Stator

  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Pick up pulsar coil included
  • Connector included
  • Rubber grommet included
  • Adjustable timing plate to advance and retard up to 10 degrees included

20% MORE OUTPUT OVER STOCK, WORKS WITH ALL OTHER OEM COMPONENTS.

High Performance CDI Box:

  • Enhanced timing curve, increased rev limiter (approximately 1000 rpm)
  • Higher grade of electronic components.

External Ignition Coil

  • Highest grade lamination materials.
  • Spark plug cap(s) included

Improved Stronger Magneto Flywheel Rotor
RMSTATOR is offering a new replacement flywheel with stronger magnets for your Banshee. This flywheel can be used as a direct replacement to the OEM.
We suggest combining it to our 100 or 200 watt stator as it will run the lights better in the lower rpm's.

Videos

Specifications

Stator
Interior diameter : 40mm
Exterior diameter : 103mm
Thickness : 17mm
Length of wires stator to grommet : 150mm
Length of wires grommet to plug : 330mm
Length of pickup coil's wire to grommet : 270mm

Other specifications :
Number of wires : 6
Number of plugs : 3
Number of pins : 3

Wire to wire resistance :
Alternator : = Yellow to Black = 0.4 ohms +/-20%
Pickup : White/Green to White/Red = 115 ohms +/-20%
Source : Green to Red = 22 ohms +/-20%

Dimensions High Performance CDI Box:
Height: 25mm
Length: 87mm
Width: 71mm
Fixation holes center to center: 85mm

Other specifications:
Number of plugs: 2
Number of pins: 8

External Ignition coil
Distance between fixation holes: 90mm

OEM # Replacement

Stator:
3GG-85510-00-00
3GG-85510-01-00

HP CDI Box:
3GG-85540-10-00

External Ignition Coil:
2GU-82310-50-00
2GU-82310-51-00

Flywheel:
3GG-85550-00-00
2GU-85550-50-00

Fits models

Installation instructions

Before installing your new stator
  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

CDI Box HP

Our CDI may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This CDI is designed as a direct plug-in replacement and should be used as such.

Flywheel

Before attempting to start your banshee adjusting the air gap is necessary.

Rotate the flywheel so the raised node is lined up with the pick up/pulsar coil and adjust as close as possible but no less than 0.010メメ.


External ignition coil

Remove the yellow wire from the external ignition coil, if it is not applicable to your model.


Reviews

Q&A