Menu

Worldwide USA & International Customer?  Go to International Store

X

Based on your location and your browser preferences, we suggest the following regional preferences:

English, Worldwide

Customer Service 1-877-838-1399 - 8AM-5PM EST Mon-Thu & 8AM-4PM EST Fri

Cart

0 item (CA$0.00)

X

You are currently searching with filters

Recall Kit (Stator Flywheel Mosfet) For Aprilia RSV4 2011-2017 / Tuono 1000 V4 2011-2015 / Tuono 1100 V4 2016-2017

RMS900-103810
RMSTATOR

Recall Kit (Stator Flywheel Mosfet) For Aprilia RSV4 2011-2017 / Tuono 1000 V4 2011-2015 / Tuono 1100 V4 2016-2017

RMS900-103810
RMSTATOR
Exact fit

Availability: Out of stock

Price: CA$454.00

Recall-Type Stator Flywheel Rotor & MOSFET Voltage Regulator For Aprilia 2009-2017 RSV4 & 2011-2017 Tuono V4 Repl.# 2D000049 897479

Introducing our newest heavy-duty recall-type charging system upgrade kit for Aprilia 2009-2017 RSV4 & 2011-2017 Tuono V4.

Anyone who rides or repairs Aprilia’s motorcycles is probably familiar with the flywheel problems common to these models. Most of these bikes will have had at least one flywheel failure in their lifetime so far. Low quality epoxy was used on OEM flywheels to secure the magnets to the rotor body. Over time and many heat cycles, the epoxy fails allowing the magnets to come loose and contact the stator, potentially causing catastrophic damage.

To prevent or correct the flywheel problems, our engineers at RMS Labs have come up with a complete reliable heavy-duty charging system replacement kit for your Aprilia. The kit includes a brand new MOSFET voltage regulator since it is often damaged when stators fails.

Included in this kit

  • Heavy-duty Kokusan brand recall-type OEM flywheel
  • Triple-tested heavy-duty stator
  • Heavy-duty voltage regulator with RMSTATOR’s renowned MOSFET regulation technology

  • With this kit, you will be able to upgrade your current failure-prone charging system with a heavy-duty version using the latest technologies.

    Features

    Built to OEM size

    Fits precisely in your ride: install it and forget it.

    RMSTATOR renowned MOSFET voltage regulation design

    Significantly decreases internal operating temperature with highly efficient MOSFET transistor regulation circuit. This technology runs much cooler than the OEM silicon rectifier regulation circuit and requires much less power to operate.

    Improved epoxy

    Uses high temperature epoxy that is stronger than OEM, eliminating the possibility of magnet detachment.

    High grade steel capping

    Prevents harsh additives in motor oil from degrading the epoxy attaching the magnets. Though extremely unlikely, if a magnet did ever come loose, it would remain in the sleeve preventing contact with the stator.

    Precise balancing/strong>

    Eliminates crankshaft vibrations for longer engine longevity.

    Shop with confidence

    One year warranty. All products are tested.

    Don't waste time with temporary solutions, and start fixing your ride like a pro!


    Please note: This version of the stator and flywheel are in use for RSV4 engine numbers higher than 3413 only. All Tuono V4s seem to use this Kokusan version. Double-check the flywheel with your original before buying this kit.

    Details

    Recall-Type Stator Flywheel Rotor & MOSFET Voltage Regulator For Aprilia 2009-2017 RSV4 & 2011-2017 Tuono V4 Repl.# 2D000049 897479

    Introducing our newest heavy-duty recall-type charging system upgrade kit for Aprilia 2009-2017 RSV4 & 2011-2017 Tuono V4.

    Anyone who rides or repairs Aprilia’s motorcycles is probably familiar with the flywheel problems common to these models. Most of these bikes will have had at least one flywheel failure in their lifetime so far. Low quality epoxy was used on OEM flywheels to secure the magnets to the rotor body. Over time and many heat cycles, the epoxy fails allowing the magnets to come loose and contact the stator, potentially causing catastrophic damage.

    To prevent or correct the flywheel problems, our engineers at RMS Labs have come up with a complete reliable heavy-duty charging system replacement kit for your Aprilia. The kit includes a brand new MOSFET voltage regulator since it is often damaged when stators fails.

    Included in this kit

  • Heavy-duty Kokusan brand recall-type OEM flywheel
  • Triple-tested heavy-duty stator
  • Heavy-duty voltage regulator with RMSTATOR’s renowned MOSFET regulation technology

  • With this kit, you will be able to upgrade your current failure-prone charging system with a heavy-duty version using the latest technologies.

    Features

    Built to OEM size

    Fits precisely in your ride: install it and forget it.

    RMSTATOR renowned MOSFET voltage regulation design

    Significantly decreases internal operating temperature with highly efficient MOSFET transistor regulation circuit. This technology runs much cooler than the OEM silicon rectifier regulation circuit and requires much less power to operate.

    Improved epoxy

    Uses high temperature epoxy that is stronger than OEM, eliminating the possibility of magnet detachment.

    High grade steel capping

    Prevents harsh additives in motor oil from degrading the epoxy attaching the magnets. Though extremely unlikely, if a magnet did ever come loose, it would remain in the sleeve preventing contact with the stator.

    Precise balancing/strong>

    Eliminates crankshaft vibrations for longer engine longevity.

    Shop with confidence

    One year warranty. All products are tested.

    Don't waste time with temporary solutions, and start fixing your ride like a pro!


    Please note: This version of the stator and flywheel are in use for RSV4 engine numbers higher than 3413 only. All Tuono V4s seem to use this Kokusan version. Double-check the flywheel with your original before buying this kit.

    Videos

    Specifications

    Stator

    Dimensions:
    Interior diameter : 42 mm
    Exterior diameter : 105 mm
    Thickness : 15 mm
    Length of wires stator to grommet : 100 mm
    Length of wires grommet to plug : 330 mm

    Other specifications :
    Number of wires : 3
    Number of plugs : 1
    Number of pins : 3

    Wire to wire resistance :
    Alternator : Between Yellow = 0.4 ohms +-20%

    Flywheel

    Dimensions:
    Exterior Diameter: 121 mm
    Interior Diameter: 107 mm
    Interior Diameter Center Housing: mm
    Exterior Diameter Center Housing: mm
    Thickness (exterior): mm
    Thickness (interior): mm

    Mosfet Voltage Regulator

    Dimensions:
    Width: 80 mm
    Length: 110 mm
    Height: 28 mm
    Wires length: 150 & 400 mm
    Fixation holes center to center: 80 mm

    Other specifications:
    Number of plugs: 2
    Number of pins: 7
    Number of wires: 7
    Minimum Charging Voltage: 14.5V +- 0.5V
    Maximum Charging Current: 50A/500W
    Open Circuit Voltage: 15V
    Operation Temperature: -20⁰ to 85⁰

    OEM # Replacement

    RMS900-103810

    Fits models

    Installation instructions

    N/A

    Reviews

    Q&A