Close

EXPERIENCE THE RMSTATOR WAY
WITH FREE 2-YEAR WARRANTY

Menu

Worldwide USA & International Customer?  Go to International Store

X

Based on your location and your browser preferences, we suggest the following regional preferences:

English, Worldwide

Customer Service 1-877-838-1399 - 8AM-5PM EST Mon-Thu & 8AM-4PM EST Fri

Cart

0 item (CA$0.00)

X

You are currently searching with filters

Kit Flywheel + Stator for Polaris Sportsman 335 / 400 / 500 | Xplorer 500 | Magnum 425 | Worker 335 1995-2002

RMS900-104043
RMSTATOR

Kit Flywheel + Stator for Polaris Sportsman 335 / 400 / 500 | Xplorer 500 | Magnum 425 | Worker 335 1995-2002

RMS900-104043
RMSTATOR
Exact fit
Get 15% discount when buying 2 parts and more.
Discount will apply in the cart.

Availability: Out of stock

Price: CA$483.00

Brand new aftermarket Stator + Flywheel Kit

Brand new Magneto Flywheel Rotor

  • All products are tested

All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part

Brand new stator

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation
  • Highest grade of lamination materials
  • Highest grade of copper winding, resistant to 200 degrees Celsius
  • Pick up pulsar coil included
  • Connector included
  • Rubber grommet included
  • All shipped products are tested

*All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.


Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.


There is more than one possible stator that can match with this flywheel, please compare your part with our picture. The other stator is in the kit flywheel + stator RMS900-104042

Details

Brand new aftermarket Stator + Flywheel Kit

Brand new Magneto Flywheel Rotor

  • All products are tested

All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part

Brand new stator

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation
  • Highest grade of lamination materials
  • Highest grade of copper winding, resistant to 200 degrees Celsius
  • Pick up pulsar coil included
  • Connector included
  • Rubber grommet included
  • All shipped products are tested

*All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.


Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.


There is more than one possible stator that can match with this flywheel, please compare your part with our picture. The other stator is in the kit flywheel + stator RMS900-104042

Videos

How Charging / Ignition / Starting Systems Work

How to repair your connectors like a pro!

RMSTATOR Corporate Video

Specifications

Flywheel :

Dimensions:
Exterior Diameter: 130 mm
Interior Diameter: 116 mm
Interior Diameter Center Housing: 24.50 mm
Exterior Diameter Center Housing: 22.50 mm
Thickness (exterior): 44.70 mm
Thickness (interior): 40 mm

Stator :

Dimensions :
Interior diameter : 42 mm
Exterior diameter : 105 mm
Thickness : 32 mm
Length of wires stator to grommet : 140 mm
Length of wires grommet to plug : 1000 mm
Length of pickup coil's wire to grommet : 170 mm

Other specifications :
Number of wires : 9
Number of plugs : 7
Number of pins : 12

Wire to wire resistance :
Alternator : Yellow to Yellow/Red = 0.4 ohms +/-20%
Pickup : White/Red to White = 115 ohms +/-20%
Source : Black/Red to Green = 45 0ohms +/-20%
Source 2 : Red to Green = 4.1 ohms +/-20%

OEM # Replacement

104043-R00

Fits models

Installation instructions

Flywheel :

Before attempting to start your Polaris vehicule adjusting the air gap is necessary. Rotate the flywheel so the raised node is lined up with the pick up/pulser coil and adjust as close as possible but no less than 0.010".

Before installing your new stator

    Stator :

  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

Reviews

Q&A