Kit High Output Stator + Crankcase Cover Gasket for Honda TRX 400 EX Sportrax / TRX 400 X 1999-2013

• 2013 Honda TRX 400 X
• 2012 Honda TRX 400 X
• 2009 Honda TRX 400 X
• 2008 Honda TRX 400 EX Sportrax
• 2007 Honda TRX 400 EX Sportrax
• 2006 Honda TRX 400 EX Sportrax
• 2005 Honda TRX 400 EX Sportrax
• 2004 Honda TRX 400 EX Sportrax
• 2003 Honda TRX 400 EX Sportrax
• 2002 Honda TRX 400 EX Sportrax
• 2001 Honda TRX 400 EX Sportrax
• 2000 Honda TRX 400 EX Sportrax
• 1999 Honda TRX 400 EX Sportrax

RMS900-103541

Dimensions :
Interior diameter: 53 mm
Exterior diameter: 115 mm
Thickness: 14 mm
Length of wires stator to grommet: 90 mm
Length of wires grommet to plug: 560 mm
Length of pickup coil's wire to grommet: 250 mm

Other specifications :
Number of wires: 5
Number of plugs: 2
Number of terminals: 5
Alternator: Green to White = 0.4 ohms +/-20%
Pick up: Blue/Yellow to Green/Red = 230 ohms +/-20%
Source: Black/Red to Brown = 90 ohms +/-20%

Before installing your new stator

• Check the AC output of the stator
• Replace any burned or corroded connectors on stator and regulator rectifier
• Check and repair any melted wiring
• Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010''.