Kit Improved Heavy Duty Stator + Voltage Regulator + Stator Cover Gasket for Suzuki GSXR 600 GSX-R 750 2006-2009
- 2015 Suzuki GSXR 750
- 2015 Suzuki GSXR 600
- 2014 Suzuki GSXR 750
- 2014 Suzuki GSXR 600
- 2013 Suzuki GSXR 750
- 2013 Suzuki GSXR 600
- 2012 Suzuki GSXR 750
- 2012 Suzuki GSXR 600
- 2011 Suzuki GSXR 750
- 2011 Suzuki GSXR 600
- 2009 Suzuki GSXR 750
- 2009 Suzuki GSXR 600
- 2008 Suzuki GSXR 750
- 2008 Suzuki GSXR 600
- 2007 Suzuki GSXR 750
- 2007 Suzuki GSXR 600
- 2006 Suzuki GSXR 750
- 2006 Suzuki GSXR 600
Dimensions :
Interior diameter : 36mm
Exterior diameter : 106mm
Thickness : 8mm
Length of wires stator to grommet : 60mm
Length of wires grommet to plug : 315mm
Length of pickup coil's wire to grommet : N/A
Other specifications :
Number of wires : 3
Number of plugs : 1
Number of pins :3
Wire to wire resistance :
Alternator : Yellow Between each Yellow = 0.4 ohms +/-20%
Voltage regulator rectifier
Dimensions :
Width : 30mm
Length : 100mm
Height: 80mm
Wires length : 260mm 250mm
Fixation holes center to center : 80mm
Other specifications :
Number of plugs : 2
Number of wires : 7
Number of pins : 7
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors.
Brand new Stator + Voltage Regulator Rectifier + Gasket Kit
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation
- All shipped products are tested
We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.
*All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.
Stator- Highest grade of lamination materials
- Highest grade of copper winding, resistant to 200 degrees Celsius
- Connector included
- Rubber grommet included
- Gasket included
At RMSTATOR, we believe that proper installation guarantees a longer lifetime. This is why we include, at no extra charge, a stator cover gasket and a dielectric grease tube.
Consult the connector’s circle of death for more information on dielectric grease.
- The Quality exceeds the OEM equipment
- Improved heat sink and charging capabilities
- Higher grade of electric components