Menu

Worldwide USA & International Customer?  Go to International Store

X

Based on your location and your browser preferences, we suggest the following regional preferences:

English, Worldwide

Customer Service 1-877-838-1399 - 8AM-5PM EST Mon-Thu & 8AM-4PM EST Fri

Cart

0 item (CA$0.00)

X

You are currently searching with filters

Kit Improved Flywheel + Puller + Stator + Regulator Rectifier + Crankcase Cover Gasket For Arctic Cat 400 Manual 2003-2008

RM23028
RMSTATOR

Kit Improved Flywheel + Puller + Stator + Regulator Rectifier + Crankcase Cover Gasket For Arctic Cat 400 Manual 2003-2008

RM23028
RMSTATOR

Availability: In stock

Price as configured: CA$0.00

Retail: CA$667.00 Special:
CA$633.65

Price as configured: CA$0.00

This kit includes

Voltage Regulator Rectifier For Arctic Cat 2001-2009 375 / 400 / 500 / TRV 500 Suzuki 2003-2008 SV 1000 / 650 VStrom 650   Price: CA$97.85
Flywheel Puller For Suzuki LTA LTF 400 Eiger Arctic Cat 400 500 ATV & Suzuki Motorcycles 1998-2014   Price: CA$73.15
Stator Crankcase Cover Gasket For Arctic Cat 400 Manual Suzuki LTF 400 Eiger / KingQuad Manual 2002-2016   Price: CA$18.05
Improved Magneto Flywheel Rotor For Suzuki LTA 400 Eiger LTF 400 Eiger Arctic Cat 375 400 TBX 400 TRV 400 2002-2008   Price: CA$246.05
Stator For Arctic Cat 375 400 650 Prowler Mudpro TBX TRV 2002-2011 Suzuki LTF LTA 400 Eiger 2002-2007   Price: CA$198.55

* Required Fields

PLEASE NOTE: This kit will not fit automatic transmissions, but only the manual models. Use our kit RM23050 instead.

Save 5 % off the items priced combined, when buying a kit

This product was featured in ATV Illustrated Magazine
Read the article >



Brand new Kit Magneto Flywheel + Puller + Stator + Gasket + Voltage Regulator Rectifier

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation.
  • All products shipped are tested
  • One year limited warranty
Magneto flywheel rotor
RMSTATOR is offering a new replacement flywheel. This flywheel can be used as a direct replacement to the OEM.

Why our RM11502 flywheel is improved

2002-2007 Suzuki Eiger 400 and 2003-2008 Arctic Cat 400 ATVs are plagued with problems on the original flywheels. The additives in the motor oil were dissolving the epoxy that holds the magnets in the flywheel, causing them to detach and scatter throughout the engine.


The bad news is that by the time the problem occurred, no manufacturer would provide warranty repairs.


2 EXPOSED EPOXY

2 DETACHED MAGNET


The good news is that RMSTATOR has manufactured a redesigned flywheel where the magnets are sealed in the flywheel, which reinforces the epoxy and prevents them from detaching. This new flywheel configuration corrects the problem permanently.


Dealership estimates to repair this failure are over $500 in parts alone. RMSTATOR offers you a high quality replacement part that corrects the problem for half the price. The RM11502 flywheel is not only a cost effective way to replace your failed Suzuki or Arctic Cat flywheel, but a great investment when replaced before the failure occurs.


3 SEAL THAT PROTECTS THE MAGNET’S EPOXY FROM OIL ADDITIVES

original-flywheel


improved-flywheel

Flywheel Puller:
  • 27 MM x 1.0 Left hand male
  • Brand new flywheel puller

Stator
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Pick up pulsar coil included
  • Connector included
  • Rubber grommet included

Voltage Regulator Rectifier
  • Improved heat sink and charging capabilities
  • Higher grade of electric components.

Details

PLEASE NOTE: This kit will not fit automatic transmissions, but only the manual models. Use our kit RM23050 instead.

Save 5 % off the items priced combined, when buying a kit

This product was featured in ATV Illustrated Magazine
Read the article >



Brand new Kit Magneto Flywheel + Puller + Stator + Gasket + Voltage Regulator Rectifier

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation.
  • All products shipped are tested
  • One year limited warranty
Magneto flywheel rotor
RMSTATOR is offering a new replacement flywheel. This flywheel can be used as a direct replacement to the OEM.

Why our RM11502 flywheel is improved

2002-2007 Suzuki Eiger 400 and 2003-2008 Arctic Cat 400 ATVs are plagued with problems on the original flywheels. The additives in the motor oil were dissolving the epoxy that holds the magnets in the flywheel, causing them to detach and scatter throughout the engine.


The bad news is that by the time the problem occurred, no manufacturer would provide warranty repairs.


2 EXPOSED EPOXY

2 DETACHED MAGNET


The good news is that RMSTATOR has manufactured a redesigned flywheel where the magnets are sealed in the flywheel, which reinforces the epoxy and prevents them from detaching. This new flywheel configuration corrects the problem permanently.


Dealership estimates to repair this failure are over $500 in parts alone. RMSTATOR offers you a high quality replacement part that corrects the problem for half the price. The RM11502 flywheel is not only a cost effective way to replace your failed Suzuki or Arctic Cat flywheel, but a great investment when replaced before the failure occurs.


3 SEAL THAT PROTECTS THE MAGNET’S EPOXY FROM OIL ADDITIVES

original-flywheel


improved-flywheel

Flywheel Puller:
  • 27 MM x 1.0 Left hand male
  • Brand new flywheel puller

Stator
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Pick up pulsar coil included
  • Connector included
  • Rubber grommet included

Voltage Regulator Rectifier
  • Improved heat sink and charging capabilities
  • Higher grade of electric components.

Specifications

Stator:
Dimensions:
Interior diameter: 53 mm
Exterior diameter: 119 mm
Thickness: 15 mm

Other specifications:
Number of wires: 7
Number of plugs: 4
Number of pins: 7

Wire to wire resistance:
Alternator : White Between each White = 0.4 ohms+/-20%
Alternator : White to Ground = O.L. ON DISPLAY
Pick up Coil : Blue to green = 200 ohms+/- 20%
Position Sensor :White to yellow = 0.2 ohms+/- 20%

Voltage Regulator Rectifier:
Dimensions :
Width : 80mm
Length : 114mm
Height: 30mm
Fixation holes center to center : 80mm
Wires length: 250mm

Other specifications :
Number of plugs : 2
Number of pins : 7
Minimum Charging Voltage: 14.5V +/- 0.5V
Maximum Charging Current: 25A-35A/300W-500W
Open Circuit Voltage: <15V
Operation Temperature: -20⁰ to 85⁰

OEM # Replacement

Flywheel:
3430-054
3430-071

Flywheel Puller:
0444-075
0444-254

Stator:
0802-037
3430-053

Regulator:
3402-682
3530-028

Gasket:
3402-768

Fits models

Installation instructions

Flywheel
Before attempting to start your machine, adjusting the air gap is necessary. Rotate the flywheel so the raised node is lined up with the pick up/pulser coil and adjust as close as possible but no less than 0.010’’.

Stator
Before installing your new stator

  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original. `
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.

Voltage Regulator Rectifier
Before installing your new voltage regulator rectifier;

  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors.

Videos

Reviews

Q&A