Menu

Worldwide USA & International Customer?  Go to International Store

X

Based on your location and your browser preferences, we suggest the following regional preferences:

English, Worldwide

Customer Service 1-877-838-1399 - 8AM-5PM EST Mon-Thu & 8AM-4PM EST Fri

Cart

0 item (CA$0.00)

X

You are currently searching with filters

Kit High Output Stator 140 W + Voltage Regulator Rectifier For Yamaha YFZ 450 2004-2009

RM22430
RMSTATOR

Kit High Output Stator 140 W + Voltage Regulator Rectifier For Yamaha YFZ 450 2004-2009

RM22430
RMSTATOR
Exact fit

Availability: In stock

Price: CA$164.63

OR
YOU SAVE 15% off the items price combined, when buying a kit.

Brand new HO stator pick up coils and heavy duty regulator rectifier kit

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation.
  • All product shipped are tested
  • One year limited warranty

We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.

*All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.

High output stator
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Pick up pulsar coil included
  • Connector included
  • Rubber grommet included
  • Back Plate included

20% MORE OUTPUT OVER STOCK, WORKS WITH ALL OTHER OEM COMPONENTS.

Heavy duty voltage regulator rectifier
  • The Quality exceeds the OEM equipment
  • Improved heat sink and charging capabilities
  • Higher grade of electric components.

Details

YOU SAVE 15% off the items price combined, when buying a kit.

Brand new HO stator pick up coils and heavy duty regulator rectifier kit

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation.
  • All product shipped are tested
  • One year limited warranty

We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.

*All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.

High output stator
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Pick up pulsar coil included
  • Connector included
  • Rubber grommet included
  • Back Plate included

20% MORE OUTPUT OVER STOCK, WORKS WITH ALL OTHER OEM COMPONENTS.

Heavy duty voltage regulator rectifier
  • The Quality exceeds the OEM equipment
  • Improved heat sink and charging capabilities
  • Higher grade of electric components.

Videos

Specifications

Stator
Dimensions :
Interior diameter : 30 mm
Exterior diameter : 85 mm
Thickness : 10 mm
Length of wires stator to grommet : 180 mm
Length of wires grommet to plug : 900 mm
Length of pickup coil's wire to grommet : 90 mm

Other specifications :
Number of wires : 4
Number of plugs : 2
Number of pins : 4

Wire to wire resistance :
Pickup : White to Red = 275 ohms +/- 20%
Alternator : White to Yellow = 0.4 ohms +/- 20%

Voltage regulator rectifier
Dimensions :
Width : 63 mm
Length : 78 mm
Height: 26 mm
Fixation holes center to center : 60 mm
Wires length: 450 mm

Other specifications :
Number of plugs : 1
Number of pins : 4

OEM # Replacement

RM22430-R00

Fits models

Installation instructions

Before installing your new stator:
  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code then youメre original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010.

Before installing your new regulator/rectifier:

  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors.

Reviews

Q&A