Menu

Worldwide USA & International Customer?  Go to International Store

X

Based on your location and your browser preferences, we suggest the following regional preferences:

English, Worldwide

Customer Service 1-877-838-1399 - 8AM-5PM EST Mon-Thu & 8AM-4PM EST Fri

Cart

0 item (CA$0.00)

X

You are currently searching with filters

Kit CDI Box + Voltage Regulator Rectifier For Kawasaki KLF 300 Bayou 1999-2004

RM22830
RMSTATOR

Kit CDI Box + Voltage Regulator Rectifier For Kawasaki KLF 300 Bayou 1999-2004

RM22830
RMSTATOR

Availability: In stock

Price: CA$259.00

OR
YOU SAVE 5% off the items price combined, when buying a kit.

Brand New Kit CDI Box + Voltage Regulator Rectifier

  • Our part is a Plug-and-play unit, direct fit, and easy to install.
  • The Quality exceeds the OEM equipment
  • All products shipped are tested
  • One year limited warranty

*All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.

CDI Box
  • Enhanced timing curve, increased rev limiter (approximately 1000 rpm)
  • Higher grade of electronic components.

Voltage Regulator Rectifier:
  • Higher grade of electric components.
  • Improved heat sink and charging capabilities

*Kawasaki KLF 300 1992 to 2004 have more than one possible regulator rectifiers; RM30W02 or RM30401

There is more than one possible CDI Box for this model, please compare your part with our picture. Here is the other possible kit :RM22822

We highly recommend replacing the voltage regulator rectifier at the same time as the CDI unit. It is the reason for CDI failures. These units are triple tested at the factory to make sure they perform properly.

Details

YOU SAVE 5% off the items price combined, when buying a kit.

Brand New Kit CDI Box + Voltage Regulator Rectifier

  • Our part is a Plug-and-play unit, direct fit, and easy to install.
  • The Quality exceeds the OEM equipment
  • All products shipped are tested
  • One year limited warranty

*All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.

CDI Box
  • Enhanced timing curve, increased rev limiter (approximately 1000 rpm)
  • Higher grade of electronic components.

Voltage Regulator Rectifier:
  • Higher grade of electric components.
  • Improved heat sink and charging capabilities

*Kawasaki KLF 300 1992 to 2004 have more than one possible regulator rectifiers; RM30W02 or RM30401

There is more than one possible CDI Box for this model, please compare your part with our picture. Here is the other possible kit :RM22822

We highly recommend replacing the voltage regulator rectifier at the same time as the CDI unit. It is the reason for CDI failures. These units are triple tested at the factory to make sure they perform properly.

Videos

Specifications

CDI Box
Number of plugs: 2
Number of pins: 5
Height: 22mm
Length: 74mm
Width: 80mm

The only real way to test your CDI box is to swap it out with another known good unit from the same year/make/model. Because of this, we recommend that you rule everything else out before replacing the CDI box

Voltage Regulator Rectifier:
Width : 80mm
Length : 90mm
Height: 28mm
Fixation holes center to center : 70mm
Wires length: 200mm

Other specifications :
Number of plugs : 2
Number of pins : 8
Minimum Charging Voltage: 14.5V +/- 0.5V
Maximum Charging Current: 25A-35A/300W-500W
Open Circuit Voltage: <15V
Operation Temperature: -20⁰ to 85⁰

OEM # Replacement

Voltage Regulator Rectifier:
21066-1112
K2106-61112
21066-0047
K2106-60047

CDI Box:
21119-1241
21119-1258
21119-1302
21119-1369

Fits models

Installation instructions

CDI Box

Our CDI may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This CDI is designed as a direct plug-in replacement and should be used as such.

Before installing your new regulator/rectifier
  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors.

Reviews

Q&A