Menu

Worldwide USA & International Customer?  Go to International Store

X

Based on your location and your browser preferences, we suggest the following regional preferences:

English, Worldwide

Customer Service 1-877-838-1399 - 8AM-5PM EST Mon-Thu & 8AM-4PM EST Fri

Cart

0 item (CA$0.00)

X

You are currently searching with filters

High Output Performance Generator Stator 100 W / Adjustable Timing Backplate For Yamaha YFZ 350 Banshee 1995-2006

RM01032
RMSTATOR

High Output Performance Generator Stator 100 W / Adjustable Timing Backplate For Yamaha YFZ 350 Banshee 1995-2006

RM01032
RMSTATOR
Exact fit

Availability: In stock

Price: CA$144.00

OR

Customer who bought this product also bought:


Brand new high output generator stator 100 watts with adjustable timing backplate

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation.
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Pick up pulsar coil included
  • Connector included
  • Rubber grommet included
  • Adjustable timing plate to advance and retard up to 10 degrees included
  • All product shipped are tested
  • One year limited warranty

20% MORE OUTPUT OVER STOCK, WORKS WITH ALL OTHER OEM COMPONENTS.

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.


Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.


We offer as well two other stators for these models:
  • Stator 100 W without a backplate : product RM01043
  • Stator 200 W with a backplate and a regulator : product RM01034
  • Details

    Brand new high output generator stator 100 watts with adjustable timing backplate

    • Direct replacement to your original unit
    • Plug-and-play, direct fit, easy installation.
    • Highest grade lamination materials
    • Highest grade copper windings, resistant to 200 degrees Celsius.
    • Pick up pulsar coil included
    • Connector included
    • Rubber grommet included
    • Adjustable timing plate to advance and retard up to 10 degrees included
    • All product shipped are tested
    • One year limited warranty

    20% MORE OUTPUT OVER STOCK, WORKS WITH ALL OTHER OEM COMPONENTS.

    *All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.


    Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.


    We offer as well two other stators for these models:
  • Stator 100 W without a backplate : product RM01043
  • Stator 200 W with a backplate and a regulator : product RM01034
  • Videos

    Specifications

    Dimensions :
    Interior diameter : 40mm
    Exterior diameter : 103mm
    Thickness : 17mm
    Length of wires stator to grommet : 150mm
    Length of wires grommet to plug : 330mm
    Length of pickup coil's wire to grommet : 270mm

    Other specifications :
    Number of wires : 6
    Number of plugs : 3
    Number of pins : 3

    Wire to wire resistance :
    Alternator : = Yellow to Black = 0.4 ohms +/-20%
    Pickup : White/Green to White/Red = 115 ohms +/-20%
    Source : Green to Red = 22 ohms +/-20%

    OEM # Replacement

    3GG-85510-00-00
    3GG-85510-01-00

    Fits models

    Installation instructions

    Before installing your new stator
    • Check the AC output of the stator.
    • Replace any burned or corroded connectors on stator and regulator/rectifier
    • Check and repair any melted wiring.
    • Use hi-temp dielectric grease on all connectors

    Our stator may use a different wire color code than your original.
    All of the wires are installed in the correct order; please do not change any of the wiring configurations.
    This stator is designed as a direct plug-in replacement and should be used as such.

    When bolting stator in, always use locking compound.
    If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

    Reviews

    Q&A