Menu

Worldwide USA & International Customer?  Go to International Store

X

Based on your location and your browser preferences, we suggest the following regional preferences:

English, Worldwide

Customer Service 1-877-838-1399 - 8AM-5PM EST Mon-Thu & 8AM-4PM EST Fri

Cart

0 item (CA$0.00)

X

You are currently searching with filters

Generator Stator For Ski-Doo Grand Touring Renegade MX Z Summit GSX 500 600 800 2008-2015 / Lynx Xtrim Rave 600 800 2008-2010

RM01326
RMSTATOR

Generator Stator For Ski-Doo Grand Touring Renegade MX Z Summit GSX 500 600 800 2008-2015 / Lynx Xtrim Rave 600 800 2008-2010

RM01326
RMSTATOR

Availability: In stock

Price: CA$234.00

OR

Brand new generator stator

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation.
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Pick up pulsar coil included
  • Connector included
  • All product shipped are tested
  • One year limited warranty

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Details

Brand new generator stator

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation.
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Pick up pulsar coil included
  • Connector included
  • All product shipped are tested
  • One year limited warranty

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Videos

Specifications

Dimensions :
Interior diameter : 41mm
Exterior diameter : 103mm
Thickness : 15mm
Length of wires stator to connectors : 300mm
Length of pickup coil's wire to connectors : 380mm

Other specifications :
Number of wires : 7
Number of plugs : 2
Number of pins : 7

Wire to wire resistance :
Alternator : Yellow between each Yellow = 0.4ohms +/-20%
Pickup : Grey to Green = 300ohms +/-20%
Pickup : Yellow/White to Blue = 300ohms +/-20%

OEM # Replacement

420889904
420889907
420889908
420889909

Fits models

Installation instructions

Before installing your new stator

  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.

Reviews

Q&A