Generator Stator for Yamaha Virago 535 / 535 Special 1987-2000
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
- 2000 Yamaha Virago XV 535
- 1999 Yamaha Virago XV 535
- 1998 Yamaha Virago XV 535
- 1997 Yamaha Virago XV 535
- 1997 Yamaha Virago Special XV 535
- 1996 Yamaha Virago XV 535
- 1996 Yamaha Virago Special XV 535
- 1995 Yamaha Virago XV 535
- 1995 Yamaha Virago Special XV 535
- 1994 Yamaha Virago XV 535
- 1994 Yamaha Virago Special XV 535
- 1993 Yamaha Virago XV 535
- 1990 Yamaha Virago XV 535
- 1988 Yamaha Virago XV 535
- 1987 Yamaha Virago XV 535
Dimensions :
Interior diameter : 54 mm
Exterior diameter : 115 mm
Thickness : 14 mm
Length of wires stator to grommet 1 : 140 mm
Length of wires between grommet 1 and 2 : 7 mm
Length of wires grommet 2 to plug : 580 mm
Other specifications :
Number of wires : 5
Number of plugs : 1
Number of pins : 3
Wire to wire resistance :
Alternator : White to White = 0.7 ohms +/-20%
Before installing your new stator
- Check the AC output of the stator
- Replace any burned or corroded connectors on stator and regulatorrectifier
- Check and repair any melted wiring
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
Brand new aftermarket stator
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation.
- Highest grade of lamination materials
- Highest grade of copper winding, resistant to 200 degrees Celsius.
- Connector included
- Rubber grommet included
- All products shipped are tested
We have even included the opposite connector (main harness side), as we know these are often melted / corroded / defective and a major cause of repetitive electrical issues.
All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.