Generator Stator for Ski-Doo Grand Touring 600 / GTX 500 600 / MX Z 500 600 800 | Lynx YETI 600 2003-2010 | 420889905
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
410922965
410922993
420889905
420888313
Dimensions:
Interior diameter: 40 mm
Exterior diameter: 103 mm
Thickness: 14 mm
Length of wires stator to connector: 500 mm
Other specifications:
Number of wires:5
Number of plugs: 2
Number of pins: 5
Wire to wire resistance:
Alternator : Yellow to ground = O.L
Alternator : Between each Yellow = 0.4 ohms+/-20%
Alternator : Yellow to Green = 0.8 ohms+/-20%
Before installing your new Stator
- Check the AC output of the stator
- Replace any burned or corroded connectors on stator and regulator rectifier
- Check and repair any melted wiring
- Use hi-temp dielectric grease on all connectors
Our stator might have a different wire color code than your original part.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible but no less than 0.010".
Brand new aftermarket stator
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation
- Highest grade of lamination materials
- Highest grade of copper winding, resistant to 200 degrees Celsius
- Connector included
- All products shipped are tested
All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.