0 item (CA$0.00)
Brand new stator
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation.
- Highest grade lamination materials
- Highest grade copper windings, resistant to 200 degrees Celsius.
- Pick up pulsar coil included
- Connector included
- Rubber grommet included
- All product shipped are tested
- One year limited warranty
There is more than one possible Stator for this model, please compare your part with our picture.
*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Number of terminals : 11
Alternator : Yellow to Yellow/Red = 0.4 ohms+/-20%
Alternator : Yellow to Yellow/BLack = 0.4 ohms+/-20%
Pick up : White/Red to White = 115 ohms+/-20%
Source coil : Black/Red/Red = 225 ohms+/-20%
- ATV & SxS
OEM # Replacement
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".